Echo CWT-7410, Operator'S Manual

Page: 9 / 20

9
BEFORE YOU START
ASSEMBLY
WARNING
○
Hold the water tank platform firmly when
removing the bolts on the water tank plat-
form.
◆
The water tank platform may fall and cause in -
jury
.
○
When mounting the water tank platform, it
may turn unexpectedly, so take care not to
get your fingers caught.
CAUTION
If used while the throttle cable is caught on
other parts, neither the throttle nor the depth
adjustment will work properly.
1. Loosen the handle lock knob, rotate the cart
handle to its position for use, and then tighten
the handle lock knob to secure it.
When doing so, make sure the teeth of the tooth
lock washers mate.
Take care that the throttle cable does not get
caught on any parts when rotating the handle
into position.
Tooth lock
washer
Handle lock knob
2. The water tank platform is stowed out of the
way when shipped. While holding the water tank
base firmly, loosen and remove the bolt shown
in the illustration. When removing the water tank
platform, be careful not to damage the cable.
Water tank
platform
Bolt
3. Align the tank base and tighten the three bolts.
(Fastening torque: 10 to 14 N•m (90 to 120 in.
lb.)). Route the cable under the water tank plat-
form.
Accessory
bolts
Bolt
Cart handle
Water tank
platform
Depth adjustment cable
Depth adjustment
cable