17
WHEEL BRAKE
・
When the wheel brake becomes less effective
1. Loosen the two bolts and adjust the clearance
with the wheel.
2. Set the clearance between the rear wheel and
the brake plate to 1.0 mm (0.04 in.) at the lever
position where the wheel brake is released.
3. Tighten the two bolts.
Bolts
Brake
plate
CART
* When the cart pulls to one side.
1. Loosen the front and rear bolts on the rear han-
dle mount of the engine cut-off saw and move
the mount left or right to correct the pulling.
2. If the cart pulls to the right, move the mount of
the rear handle to the right; if it pulls to the left,
correct it by moving it to the left.
* When adjusting the rear handle mount left/right,
make small adjustments in line with the amount
of pull.
* If the cart bends when driving.
1. Loosen the two bolts.
2. Adjust the direction of the rear wheel.
3. Tighten the two bolts.
Rear wheel
Bolts
Rear wheel
Front and rear
bolts
Rear handle
mount
Summary of Contents for CWT-7410
Page 19: ...19 NOTES ...
