Echo CWT-7410, Operator'S Manual

Page: 11 / 20

11
7. Fit the bottom rear of the handle of the engine
cut-off saw between the guide pins
Guide pins
Rear handle
Rear handle plate
Cutter lock knob
Throttle plate
knob
Water tank
Groove
Coupler
8. While holding the rear handle of the engine cut-
off saw down with the rear handle plate, tighten
the cutter lock knob until it seats.
9. Turn the throttle plate clockwise and push it
in. Tighten Throttle plate knob. Make sure the
throttle lever of the cart is linked with the throttle
trigger of the engine cut-off saw and they are op-
erating smoothly together.
10. Align the hose of the water tank with the groove
in the water tank platform and mount the water
tank on the cart. Be careful not to pinch your
hands when installing Water tank.
11. Put the liquid cock of the engine cut-off saw in
the closed position. Connect the coupler to the
joint of the engine cut-off saw.
12. Make sure the throttle cable is in the correction
position.
13. Adjust the angle of rotation of the wheel guard
to the point where the wheel guard is not ob-
structed by the ground even when at the maxi-
mum depth of the cut. (Refer to the operator's
manual of the engine cut-off saw for how to
adjust the wheel guard.).
Wheel guard
Rear handle
Throttle plate