Echo CWT-7410 Operator'S Manual Download Page 18

Page: 18 / 20

STORAGE AFTER USE

WARNING

Always apply the wheel brake before any

inspections, maintenance or for storage.

STORAGE

• Remove dirt and store it after the work of the day

is finished.

• If left as-is, it will harden and be difficult to

remove, and may cause trouble later. If water is

used to for washing, dry it off afterwards.

• Check that the screws, bolts and nuts are

tightened. Tighten up any that are loose.

• For long-term storage, remove the engine cut-off

saw from the cart. Follow the instructions in the

operator's manual of the engine cut-off saw for

storage.

• Lubricate moving parts before long-term storage.

TECHNICAL DATA

Model

CWT-7410

Mountable products

CSG-7410

Dimension

L x W x H

1162 x 442 x 1069

(45.7 in. x 17.4 in. x 42.1 in.)

Mass

Unit Weight (Without engine cutter,

no water in tank)

29.5 (65 lb.)

Water Tank

Type

Gravity Supply

Volume

10 (338.14 US.ffll.oz.)

Maximum Depth

120 (4.7 in.) (with 350 mm (13.8 in.)

diameter cutting wheel)

Depth Adjustment

with (hand lever, 6 stages)

Wheel Brake

Foot Operated

Handle

Variable (15 Degree Increments)

When storing the product for long periods of

time (30 days or more), ensure that the following

preparations for storage are carried out.

*Technical data subject to change without notice.

Lubricate parts

Summary of Contents for CWT-7410




















Search results

Summary of Contents for CWT-7410

Reviews:

Related manuals for CWT-7410

Brands by name

Popular brands

Echo CWT-7410, Operator'S Manual

Search results

Summary of Contents for CWT-7410

Reviews:

Related manuals for CWT-7410

Brands by name

Popular brands