Echo CWT-7410 Operator'S Manual Download Page 8

Page: 8 / 20

OPERATOR SAFETY

WEAR PROTECTIVE GEAR

〇

Always wear the following protective gear

when working with the cut-off saw. Above

all, make sure to wear safety goggles, a dust

mask, and ear muffs at all times while work-

ing.

◆

Without the protective gear, you could inhale the

debris or dust blown away or get them in your

eyes, which could lead to an accident or injury.

a. Head protection (helmet):

Protects the head

b. Ear muffs or ear plugs:

Protect the hearing

c. Safety goggles:

Protect the eyes

d. Dust mask:

Protects the breathing apparatus

e. Safety gloves:

Protect the hands from cold and

vibration

f. Work clothes that fit (long sleeves, long trou

sers):

Protect the body

g. Heavy duty, non-slip protective boots (with

toecaps) or non-slip work shoes (with toe-

caps):

Protect the feet

◆

Failure to observe these precautions could

result in damage to your sight or hearing, or lead

to a serious injury.

WEAR PROPER CLOTHING

〇

Secure hair so it is above shoulder length.

〇

Do not wear ties, jewellery, or loose, dan-

gling clothing which could be caught in the

unit.

〇

Do not wear open toed footwear, or go bare-

foot or barelegged.

◆

Failure to observe these precautions could

result in damage to your sight or hearing, or lead

to a serious injury.

Summary of Contents for CWT-7410




















Search results

Summary of Contents for CWT-7410

Reviews:

Related manuals for CWT-7410

Brands by name

Popular brands

Echo CWT-7410, Operator'S Manual

Search results

Summary of Contents for CWT-7410

Reviews:

Related manuals for CWT-7410

Brands by name

Popular brands