Tasman Sports TR-0126-08 Assembly, Installation, Care, Maintenance, And Use Instructions Download Page 1

Page: 1 / 42

8FT (244CM) TRAMPOLINE AND

"STEELFLEX PRO" ENCLOSURE COMBO SET

Assembly, Installation, Care, Maintenance and Use Instructions

MODEL NUMBER # TR-0126-08

KEYCODE: 42847120

CUSTOMER SERVICE

Toll Free: 1-800-333-061

MONDAY-FRIDAY, 9 A.M. - 5 P.M. CENTRAL TIME



DO NOT attempt somersaults or flips. Paralysis or death can result if you land on your head or neck!



No more than one person on the trampoline at a time. Multiple users increase the risk of injury.



Use trampoline only with adult, knowledgeable supervision.



These instructions are important to minimize chances of injury. Please read each of them
thoroughly before you assemble and use this trampoline. Retain this manual for future reference.



Maximum weight of the user shall NOT exceed 165lbs/75kg for this product.

Summary of Contents for TR-0126-08











































Search results

Summary of Contents for TR-0126-08

Reviews:

Related manuals for TR-0126-08

Brands by name

Popular brands

Tasman Sports TR-0126-08, Assembly, Installation, Care, Maintenance, And Use Instructions

Search results

Summary of Contents for TR-0126-08

Reviews:

Related manuals for TR-0126-08

Brands by name

Popular brands