GETTING STARTED
WITH THE
EBS RETRACER
6
USER GUIDE
GETTING STARTED in Easy Mode:
1.
SELECT A PRESET
Press
B
or
A
to select a factory preset (indexed from Z00 to
Z31). You can change basic parameters to a preset on the fly with
the
FOUR CONTROL KNOBS
.
NOTE: changes will be lost when you move on to the next
preset. You can make changes and save to a preset following the
instructions in bullet 4.
EASY & EXPERT MODE Oper ations:
2.
SET DELAY TIME
TAP
the tempo for desired delay time or use the
DELAY
knob to
dial in a time from 50ms to 1.5s.
3.
SET TEMPO SUBDIVISION
You can change the tempo subdivisions from, for example, quarter
notes to 8th note triplets. To do that, hold down
TAP
and press
B
or
A
repeatedly until you find the desired subdivision. Use Quick
Save as described below to save the changes to your preset.
4.
PROGRAM (PRESET) QUICK SAVE
Use the Quick Save function to save changes to a preset.
Press and
hold
B
to enter the
program save menu
.
Then push
TAP/SET
to save.
If you started from a factory preset you need to save it with changes
as a new preset. The Retracer will suggest the first available slot
to save your new preset on. Use
TONE
to select bank (from A to
G) and
F.BACK
to select entry (from 0 to 31). When done, press
TAP/SET
to save and continue. You will now be prompted to Label
your new preset. Turn the
LEVEL
knob to select a character, use
B
to
move to the
next character
position and
A
to go back to the
previous
character.
Push
TAP/SET
when done to
save and exit (or
ACTIVE
to
exit
without saving)
.
Quick Save
works in both
Easy
and
Expert Mode.
1.
2A4.
