background image

5

USER GUIDE

BRIEF OVERVIEW OF EXPERT MODE:

To activate 

Expert Mode

, go to the global 

Settings Menu

, scroll to 

GENERAL 

using the LEVEL knob, press 

B

  and then scroll to 

EXPERT

Change the value in the right column to “ON” by turning the DELAY 
knob. Press 

Tap/Set 

to save and exit. The pedal is now operating in 

Expert Mode

.

To navigate between presets in Expert Mode you need to press and 
hold 

A

  until “Load” appears on screen. Then select bank and 

preset using the “Tone” and “F.Back” knobs. Press “TAP/SET” to 
load a selected preset and bank, or “ACTIVE” to escape. 

“Expert Mode” unlocks engine-specific parameters that you can 
change and save with your preset. To enter the first layer of engine 
parameters, simply press 

B

  or 

A

 . You will now see the name of 

the engine that your preset is based on. Indicators in the corners 
of the screen shows what kind of parameters you can change with 
each knob.  

NOTE: Most engines have more than one layer of engine 
parameters, if so, the corner indicators will change when you press 

B

  or 

A

  from the first engine parameter settings layer. 

Once you have changed parameters you want and decided to save 
them, press and hold 

B

  to enter SAVE and press TAP/SET to save 

and exit to your preset. 

The following pages features step-by-step instructions to some of the 
most common operations, as well as more details about the various 
settings options.

Summary of Contents for RETRACER DELAY



















Reviews: