13
USER GUIDE
How to setup LOOP MODE for a preset (in Expert Mode only)
1. Choose the preset that you would like to use in LOOP MODE.
2. Then press
A
to go directly to the menu for the specific Program settings.
The menu appears as the name of the current engine within a pair of clamps
(for example [ANALOG]), followed by a list of menu items.
You can also reach the menu by pressing
B
repeatadely until you reach the menu.
The difference is you will then walk through all the available parameter settings layer
for the selected engine before you reach the desired menu.
3. Turn Level* to scroll down to MODE and then turn the Delay knob
until LOOP appear in the right column.
4. Then scroll to menu label LOOP and choose DELAY or F.BACK,
depending on where you want the loop inserted. You can also set
LOOP to ”off”.
* TIPS: start by turning the Level knob counter-clockwise as far as possible,
and then turn clockwise to be able to scroll to the end of the submenu.
EXTERNAL EFFECT
MAIN INPUT
(MONO)
MAIN OUTPUT
(MONO)
LOOP
SEND
LOOP
RETURN
IN
OUT
LOOP
DELAY
ANALOG
How to setup LOOP MODE for a preset (in Expert Mode only)
1. Choose the preset that you would like to use in LOOP MODE.
2. Then press
A
to go directly to the menu for the specific Program settings.
The menu appears as the name of the current engine within a pair of clamps
(for example [ANALOG]), followed by a list of menu items.
You can also reach the menu by pressing
B
repeatadely until you reach the menu.
The difference is you will then walk through all the available parameter settings layer
for the selected engine before you reach the desired menu.
3. Turn Level* to scroll down to MODE and then turn the Delay knob
until LOOP appear in the right column.
4. Then scroll to menu label LOOP and choose DELAY or F.BACK,
depending on where you want the loop inserted. You can also set
LOOP to ”off”.
* TIPS: start by turning the Level knob counter-clockwise as far as possible,
and then turn clockwise to be able to scroll to the end of the submenu.
EXTERNAL EFFECT
MAIN INPUT
(MONO)
MAIN OUTPUT
(MONO)
LOOP
SEND
LOOP
RETURN
IN
OUT
LOOP
DELAY
ANALOG
how to SET UP AND USE THE LOOP MODE
