GETTING STARTED
WITH THE
EBS RETRACER
18
USER GUIDE
Technical Specifications EBS Retracer:
Nominal Levels:
- 8 dBv
Maxium Input and Output Levels:
+12 dBv
Input Impedance:
900 kohms stereo / 450 kohms mono
Output Impedance:
< 100 ohms
Bandwidth:
+0/-3 dB 20 - 20k Hz
Sampling Frequency:
48 kHz
Dynamic Range:
typ 115 dB (A-weighted)
Power Requirements:
9 - 18 V DC Regulated,
Current Consumption:
200 mA max. @ 9V / 100mA max @18V
(DC power in has no other effect on headroom or performance)
Dimensions (with xternals) W x H x D:
3.3” x 4.5” x 1.9” (83 x 115 x 48 mm)
Weight:
414 gr (0.92 lb.)
Subject to change without notice.
w w w
.
e b s s w e d e n
.
c o m
FIRMWARE UPDATES & EXTENDED SUPPORT DOCUMENTS
Find and install the FIRMWARE UTILITY software for your computer and download the latest
FIRMWARE EDITION according to instructions at
http://ebssweden.com/content2/category/retracerhelp/
The latest support documentation and software will be found there as well.
For quick access on your smartphone or Pad, scan the QR code.
IMPORTANT!
To get instant news about firmware and software updates, tutorials
and other useful info related to your pedal in your email go to
www.ebssweden.com/content2/ebs-retracer-delay-workstation
and ’Register for Updates’. Make sure to always have the latest
firmware installed.
