15
USER GUIDE
SET MID
With SET MID option it is possible to tune the modulation amount
over the calibrated range.
If you want a smooth modulation (and your expression pedal is
somewhat linear) somewhere in the middle of the calibrated range
would be a good point to start from. But if you, for example, want
to have more action in the last ten percent of the expression pedals
range, just set “mid” more towards the toes down position.
Move the pedal to the desired mid position and hit
TAP/SET
When calibration sequence is finished, press
TAP/SET
to save and exit.
C.
ACTIVTE EXP PARAMETER
(S)
Choose a sound on the Retracer to start from with the expression
pedal positioned at heel down.
Hold
TAP/SET
and press
ACTIVE
. A blinking ”E” will appear on the
screen to indicate that the delay pedal now is in ”exp record mode”.
Modify the desired parameters to the sound you would like to
modulate to.
Again, Hold
TAP
and press
ACTIVE
. This will end ”exp record
mode” and the blinking ”E” will now be fixed to indicate that this
program is using the expression pedal.
You are now ready to get blown away. Put your pedal to the metal
and the parameters will move toward the sound you decided to
modulate to.
IMPORTANT!
Visit
www.ebssweden.com/content2/ebs-retracer-delay-workstation
and click on the “Register for updates”
tab to register for the Retracer email list to get instant news about firmware and software updates, tutorials
and other useful info related to your pedal. Make sure to have the latest firmware installed.
C.
MIDI
3.5MM
MINI-TELE
IN
THRU
1
4
2
5
3
Source
Gnd
Sink
AUX IN or
LOOP RETURN
EXPRESSION or
CV PEDAL INPUT
AUX OUT or
LOOP SEND
STEREO OUT
(in Stereo & Dual mode)
EXTERNAL TAP
FOOTSWITCH
(momentary)
MASTER
CHANNEL IN
(mono)
MASTER
CHANNEL OUT
(mono)
IMPORTANT!
USE ONLY MONO
PLUG FOR THIS INPUT
For future use.
STEREO INPUT
(in Stereo & Dual mode)
