GETTING STARTED
WITH THE
EBS RETRACER
4
USER GUIDE
BRIEF Overview of EASY MODE:
Easy Mode
is the default mode when you turn on the pedal for
the first time.
.
In “EASY MODE” Use
A
or
B
to choose next or
previous preset.*
.
Use LEVEL, TONE, F.BACK and DELAY to modify the sound.
.
To SAVE changes to the preset, press and hold
B
until Save pops
up on screen, then press “TAP/SET” to save and exit the menu.
NOTE: Default presets need to be saved as a new preset if you
want to keep any changes you have made.
.
To change any of the global settings for the pedal:
1. Press and hold
B
and press
A
to access the Settings Menu
2. Use the “LEVEL” control to scroll through the menu, press
B
to open up a labels sub-menu, and use the “DELAY”
knob to change the parameter values that show up in the
right column.
3. Then press “TAP/SET” to save the changes or “ACTIVE” to
escape.
Changes in global settings will be the default settings when creating
a new preset from scratch. You can change the corresponding
values to follow a specific preset in
Expert Mode (see next page, as
well as bullet 10-12 in the following guide)
.
* To fast-scroll to a preset further down the list or in a different
bank, press and hold
A
to access the LOAD menu, then select
bank using “Tone” and preset using the “F.Back” knob. Press “TAP/
SET” to load selected preset and “ACTIVE” to escape the menu.
