GETTING STARTED
WITH THE
EBS RETRACER
10
USER GUIDE
REFERENCE GUIDE FOR THE (Global)
SETTINGS MENU & SUB MENUS
Below you will find a reference guide for the values you can change in
the global
Settings Menu
and its sub categories.
Go back to bullet 5 to
refresh your mind on how to access the settings and perform changes.
[GENERAL] SETTINGS:
-------------------------------------------------------------------------------------------------------
EXPERT:
ON/OFF
Accesses extended functionality.
TIME: AUTO / MS/S /BPM
Shows delay time in bpm or ms/s. Auto
mode displays bpm when tapped and time
when
adjusted
with
knob.
TAP:
PRG/GLOBAL
Sets Tap mode. If set to Global, global
tap/time info will override program tap.
SW.PRG:
ON/OFF
Enables program change with foot switches.
When this option is enabled, press and hold
TAP until two arrows appear. Escape from this
mode
while
HOLDING
Active.
PRGSTEP:
ALL/BANK
Sets program step within bank rather than
within
all
entries.
[DEFAULTS] SETTINGS (these will be the default value for all engines when creating a
new program/preset or when you switch the engine in an existing program/preset):
-------------------------------------------------------------------------------------------------------
TONE:
SOFT
6dB/oct
SHARP
12dB/oct
MIX (level):
MIX
0-100% FX MIX, fully cw DRY OFF
ADD
Wet signal only added to dry
XFADE
Cross fade between dry and wet signal
BYPASS:
TB
True bypass (relay)
TAIL
Tail mode, buffered bypass
BUF
Buffered bypass, no tail
MODE :
MONO
Mono/Direct out
STEREO
Mono engine, stereo mix
DUAL
Stereo (dual mono)
LOOP
Mono, 2nd channel loop
LOOP:
OFF
Disable
DELAY
Loop inserted in delay Path
F.BACK
Loop inserted in feedback loop
[
SETTINGS
]
GENERAL
DEFAULTS
MIDI
DISPLAY
INPUTS
SYSTEM
HELP
[
SETTINGS
]
GENERAL
DEFAULTS
MIDI
DISPLAY
INPUTS
SYSTEM
HELP
NOTE: When you are in
the Settings Menu, scroll
down with LEVEL and press
B
to access the chosen
chategories submenu.
