EPX400-A20CU – Manual
Page 50 / 62
the defined number of attempts (from 1 to 100), the device will start procedure for
connecting with a base server.
This option is enabled only when the secondary server has been defined.
Disconnect after a time limit
Selecting this box will mean that the device will disconnect with the secondary server
after the pre-defined period of time. The rest of the procedure depends on the
parameter: “Always try to connect to the primary server first”. If this option is
enabled, the device will attempt to connect to the primary server. If it is disabled,
the device will complete the procedure of connecting to the secondary server, and if
that fails, it will attempt connecting to the primary server.
Communication stability
8.9.1.4.
Ethernet watchdog
8.9.1.4.1.
This option enables automatic reaction of the communicators after it has registered
loss of Ethernet transmission. Two additional fields will appear after activating this
option:
React when a transmission is lost
Here, define the period of waiting until modem reset after detecting loss of network
connection (no transmission).
Device reset
Here, define the period of waiting until device reset (not just a modem reset) after
detecting loss of network connection (no transmission).
Cellular network
8.9.2.
If SIM card has been inserted into the SIM holder, the tab will look like this:
