EPX400-A20CU – Manual
Page 22 / 62
Open…
7.5.2.
If you have a file with saved settings, these data can be used to program another
device. First of all, specify the catalogue where the file was stored, and then specify
the file name. The obtained data set can be modified by the user. Send the read and
possibly modified data to the alarm panel by switching it into the programming mode
using a dedicated programming device.
Save as…
7.5.3.
If you program a number of devices in different configurations, you do not need to
remember each of them. You can save on your hard drive all the device settings
under a specific name and read them later. This feature saves all information from
the configuration windows to the drive. After calling the function a dialogue box
appears asking for the file name. The default data is saved with the following
extension:
.cmi
.
