use the table handle on the front of the machine and adjust the table forward and back
until the blade fits perfectly on the ball. As a double check take a dollar bill and slide
under the front edge of the blade and then the back. If you have adjusted the table
properly you will be able to slide the bill under the blade the same amount from each
end. When this is complete go to the lower digital reader and push the Zero button
until the screen shows perfect zero. You have now calibrated the digital reader for
forward and reverse to the machine.
6.
Turn the blade to a left and right position and slide your dollar bill under the left end of
the blade and then the right. Using the right or left table adjusting handle move the
table until the blade sets perfectly on the ball and check with your dollar bill again.
Then push the zero button on the upper reader.
REV A 12-2-05 8
