Eaton XP-504, Manual, Page: 81 / 98

9. Maintenance
9.3 Storage, transport and disposal
CAUTION
SHORT-CIRCUIT HAZARD
If the device is or has been exposed to environmental fluctuations
(ambient temperature, air humidity), condensation may form on or
inside it. As long as this condensation is present, there will be a
short-circuit hazard.
Do not switch on the device when it has condensation in or on it.
If the device has condensation in or on it, or if the panel has been
exposed to environmental fluctuations, let the panel settle into the
existing ambient temperature before switching it on. Do not expose
the device to direct thermal radiation from heating appliances.
Before commissioning
If storing/transporting the device in cold weather conditions or in
such a way that it will be exposed to extreme differences in tem-
perature, make sure that no condensation forms on or inside the
device.
If there is condensation in or on the device, do not switch on the
device until it is completely dry.
Use the original packaging to ship the device.
The HMI is sturdily built, but the components inside it are sensitive to excessively
strong vibrations and/or mechanical shock.
Accordingly, make sure to protect the XP-504 from mechanical loads that exceed the
scope of the unit's intended use.
The device should only be transported in its original packaging after being packed
properly.
XP-504 08/2021 MN048028EN Eaton.com
82