4. Using peripheral devices - External connections
4.3 USB interfaces
4.3 USB interfaces
The USB host ports on the HMI support USB Type-A connectors.
The Panel PC features two Dual USB 3.0 / 2.0 and two USB 3.0 / 2.0 ports.
CAUTION
When using commercially available peripheral devices (e.g., with the
USB port), it is important to keep in mind that their EMC interference
immunity parameters may render them unsuitable for use in industrial
environments.
The USB ports (USB host and USB device) on the computer core are
intended exclusively for maintenance work.
CAUTION
NON-GALVANICALLY-ISOLATED INTERFACES
The HMI may be damaged by potential differences.
The GND terminals of all bus modules must be connected.
The HMI must be de-energized before connecting or dis-
connecting any connections to it.
Only use standard USB cables with a shield.
Max. cable length: 5 m.
Dual-USB 3.0/2.0 Type A
USB 3.0/2.0 Type A
Figure 18: USB connections
53
XP-504
08/2021 MN048028EN Eaton.com
Summary of Contents for XP-504
