![background image](http://html1.mh-extra.com/html/eaton/xp-504/xp-504_manual_3752366032.webp)
3. Installation
3.1 Installation position
It can be mounted in a perfectly vertical position or at an angle of up to max. - 45° ≦ α
≦ max. + 10° in the directions shown below.
If the device is not mounted in a perfectly vertical position, make sure that air will still
be able to circulate properly through the openings in the housing.
Clear Zone
d
α
≧ 45°
α
≧ 10°
The range between 45° towards the back and 10° towards the front must be doc-
umented (for landscape mode and vertical installation)
Figure 4: Mounting position
l
Make sure that the controls and connectors on the device's service side will
remain accessible after the device has been installed.
The interfaces are located on the bottom of the computer core of
the XP-504.
Make sure to take the space required to remove the SD card and
USB drives into account.
l
If you will be using the HMI in a hazardous (explosive) location, make sure it is not
exposed to any dangerous impacts or other types of dangerous mechanical
shock.
l
No direct sunlight on the device.
CAUTION
UV LIGHT
Plastics will become brittle when exposed to UV light. This artificial
aging will reduce the XP-504 unit's lifespan. Protect the XP-504 unit
from direct sunlight and other sources of UV radiation.
l
Make sure that the XP-504 does not overheat.
l
The minimum clearance to components that radiate heat, such as transformers
under heavy loads, is 15 cm.
33
XP-504
08/2021 MN048028EN Eaton.com
Summary of Contents for XP-504
