Eaton XP-504, Manual, Page: 50 / 98

4. Using peripheral devices - External connections
4.2 SD card
4.2 SD card
The slot for the SD card is located under the holder.
CAUTION
DATA LOSS
If the SD card is being written to and a voltage drop occurs or the
card is removed, data may be lost or the SD card may be ruined.
Insert the SD card only when the XP-504 is de-energized.
Avoid writing to SD cards. Reasons:
l
SD cards have a limited number of write cycles.
l
If there is a voltage drop while a write operation is in progress,
data loss is highly likely to occur.
Remove the SD card only when the XP-504 is de-energized.
Before switching off the device, make sure that there are no pro-
grams writing to the SD card.
Inserting the SD card
SD cards cannot be inserted the wrong way around and are locked
in place in order to keep them from falling out.
Do not use force when inserting the card.
Squeeze the sides of the holder together until the latch in the housing is
released.
Remove the holder
Push the SD card into the SD card slot until you feel it lock into place.
Removing the SD card
Push the SD card into the SD card slot all the way to the stop.
Pull the SD card out of the SD card slot.
Store the SD card in its case in order to protect it.
Insert the holder back in place.
51
XP-504 08/2021 MN048028EN Eaton.com