2 XN-312-GW-EC gateway
2.6 Supply voltage connection
18
XN-312-GW-EC gateway
07/20 MN050010-EN Eaton.com
2.6 Supply voltage connection
Figure 8:
Specifications for connection to supply voltage
a
+24V V+
b
+24V V+
c
GND 0V
d
GND 0V
The two V+ terminals are internally connected to each other (X4:
a
and
b
),
as are the two 0 V terminals (X4:
c
and
d
). Only one V+ and one 0 V termi-
nal need to be connected in order to power the gateway The internally con-
nected terminals can be used to extend the 24 V and 0 V supply voltage con-
nections. However, it is necessary to make sure that a total current of 6 A is
not exceeded per terminal.
The plug connector with push-in spring-cage terminals is included in the
scope of supply.
Figure 9:
Ferrule with d2 = Max. 2.8 mm
XN-312-…
XN-312-GW-EC
I
e
[A]
≦
2.0
X3
10 mm (0.39“)
0.2 - 1.5 mm
2
10 mm (0.39“)
0.2 - 1.5 mm
2
10 mm (0.39“)
0.25 - 0.75 mm
2
AWG
AWG 24 - 16
￫
The spring-cage terminals can be used to connect ultrasonically
spliced (ultrasonically welded) wires.
V
V
0
0
X3
①
②
③
④
d2
⌀d2
