12 Sample project
12.7 What will be transferred
90
XN-312-GW-EC gateway
07/20 MN050010-EN Eaton.com
12.7.3 Process data XN-312-GW-EC gateway
The process data for all XN300 slice modules is provided to the XN-312-GW-
EC gateway. This data can be found under the XN_312_GW_EC/Process data
tab.
Outputs are in the 0x7000 range. For the outputs, this means that:
•
All 0x7010 objects are XN-322-16DO-P05 outputs.
•
All 0x7031 objects are XN-322-8AIO-U2 outputs (below)
The inputs are transmitted with objects in the 6000 range. For the inputs, this
means that:
•
Object 0x6000 – all XN-322-8DI-PD inputs
•
Object 0x601F – XN-322-16DO-P05 voltage OK input
•
All 0x6021 objects – XN-322-4AI-PTNI inputs
•
All 0x6031 objects – XN-322-8AIO-U2 inputs
Figure 59:
XN_312_GW_EC/Process data tab with process data for the gateway and all
XN300 slice modules offline
12.7.4 ONLINE CoE XN-312-GW-EC gateway
CoE (CAN application layer over EtherCAT) is the complete Ethercat gateway
object dictionary to which the objects of all XN300 slice modules are
mapped. It contains the process data and the start parameters. If communi-
cation is offline, the CoE will be generated based on the description files for
the individual devices. If the CoE is in online communication, the current val-
ues will be shown.
▶
Go online; please refer to the following as well
online and loading the program onto the PLC".
▶
Enable the "Update automatically" option.
▶
Enable the "Online from device" option
