xComfort Room Controller Touch User Manual 1v00_EN
15 |
P a g e
Leave Edit mode
Step 6
(Leave Edit mode)
Timeout or
Idle
Timeout
2.7.3 (Optional) Edit humidity Set-point
Sensor mode
The Humidity set-point is not available if the Room Controller is connected to an intelligent device, e.g.
SHC or Room Manager.
Control mode
This option is available in control mode if a humidity actuator is connected to the Room Controller Touch
during the installation. The Room Controller Touch will send an OFF command to the actuator if the
humidity is above the set-point value, and it will send an ON command if the actual humidity is below
the set-point value. The set-point value can be changed manually.
Initial select Humidity
Edit mode
Enter
Change