xComfort Room Controller Touch User Manual 1v00_EN
4 |
P a g e
2.4 Operation mode
The operation functions of the Room Controller Touch are grouped into the following:
•
Frequently used operation functions,
Basic operation
functions.
•
Occasionally used operation functions,
Enhanced operation
functions
•
Changes to the settings,
Edit operation
functions
Note:
To start operating the Room Controller Touch, touching the screen once is necessary to
activate the display.
To maximize the battery life, the Room Controller Touch display will enter the
Idle-state
. In this state,
the display shows the temperature and status with the backlight switched off. On touching the display
again it enters the
Active-state
. In this state, the backlight is switched on, and when connected to the
xComfort SHC, the information is refreshed to get the latest status.
2.4.1 Basic operations
•
Show the current temperature
•
Temporary adjust the current set-point temperature
•
Show the current set-point temperature
•
Select (another) per-defined set-point temperature (operation mode)
•
Show the current humidity
•
(Optional)
Show outdoor temperature
•
(Optional)
Show time and Day of Week
•
(Optional)
Touch-button(s)
2.4.2 Enhanced operations
•
Select regulation mode; Heating, Cooling,
(Optional)
Heating&Cooling or OFF mode
•
(Optional)
Switch Week Program Timer ON or OFF
2.4.3 Settings edit operations
•
Edit pre-defined Set-point temperatures
•
(Optional)
Edit Week Program
•
(Optional)
Edit Humidity Set-point
•
(Optional)
Edit Time and Date
•
(Optional)
Edit clock correction factor