xComfort Room Controller Touch User Manual 1v00_EN
16 |
P a g e
Leave
Timeout or
2.7.4 (Optional) Edit/Set Current Time and Date
Sensor Mode
The option to set the Time and Date manually with the Room Controller is not available if the Room
Controller is connected to an xComfort SHC. In this case, the time and date are synchronized with the
xComfort SHC date and time.
Control Mode
The Time (Hours, Minutes) and Date (Day of Month, Month and Year) can be set manually if the Week
Program is enabled during installation.
Attention:
The time and date are used for the execution of the Week Program. The Time and Date
need to be set correctly for the correct operation of the Week Program
Initial select Clock
Enter Edit Mode