xComfort Room Controller Touch User Manual 1v00_EN
8 |
P a g e
2.5.7 Show Time and Day of Week
The current time and day of week can be displayed.
2.5.8 (Optional) Touch-button(s)
The Touch-buttons of the Room Controller Touch can be used as push buttons to control the lights,
shutters/blinds in the room, for example, or to trigger Scenes in the xComfort SHC.
Note:
To get the Touch-buttons, an actuator or intelligent device must be connected to the
Touch-button of the Room Controller during the installation. Contact your installer for
more information.
The Room Controller Touch has up to two Touch-buttons
. Their behavior depends on the
configuration during the installation:
•
2x Single Pushbuttons:
Each Touch-button is connected individually to an actuator(s) or to an
intelligent device (e.g. the xComfort SHC). The Touch-button acts as single pole pushbutton.
The Touch-button supports short pressing (e.g. switch on/off) and long pressing (e.g. dimming
up/down).
•
2x Single Rocker with arrow keys:
Each Touch-button is individually connected to an actuator(s)
or to an intelligent device (e.g. xComfort SHC).
When the Touch-button is pressed it will start flashing, and the arrow keys are shown, which can
be used ‘up ‘ or ‘down’. In this respect on the ‘up’ key, apply a short press to switch on and a
long press to dim up. Press briefly on the ‘down’ key to switch off or to dim down.
•
1 Single Rocker:
Both Touch-buttons are connected to the same actuator(s). The pair of Touch-
buttons behave as one 2 pole pushbutton. The Touch-button on the left is the ON/UP
(short/long press) part and on the right the OFF/DOWN part.