xComfort Room Controller Touch User Manual 1v00_EN
2 |
P a g e
2 The Room Controller Touch
2.1 Operation
The Room Controller Touch is equipped with a Display with Backlight and Touch function. The display is
used to display the information through which, by touching the display, the Room Controller Touch can
be operated.
Note:
The display is designed to respond to on-screen pressing only. Compared to the commonly
used touch displays for smartphones and tablets it may be the case that touching the
display a little more firmly is necessary.
In the
Idle-state
the display shows the temperature and status with the backlight switched off. On
touching the display it enters the
Active-state
. In this state, the backlight is switched on, and when
connected to the xComfort SHC, the information is refreshed to get the latest status.
Note:
To maximize the battery life, a delay between the information on the display in the
idle-
state
and the actual status in the xComfort SHC is possible. The maximum possible delay
can be reduced by the installer, but this will lead to a reduction in the battery life. In other
configurations the display always contains the latest information.
Pre-defined temperature set-points
Frost protection
Night / Standby
Economy
Day / Comfort
Request status
Heating request
Cooling request
Ventilation request
Shown information selection
Temperature
Humidity
Clock
Outdoor temperature
Various
Units of the shown information
Setting
Touch-button
Floor temperature regulation active
Low battery indication
Week program timer
Week program timer activity status
Day of Week
Program timer switch time-point
