xComfort Room Controller Touch User Manual 1v00_EN
9 |
P a g e
2.6 Enhanced Operating Instructions
2.6.1
(Optional)
Activate/Deactivate Week Program
The Week Program can be optionally deactivated (OFF) or activated (ON). When it is OFF, it is only
possible to manually switch between the pre-defined set-point temperatures (operation mode), and
when it is ON, the operation mode is based on the programmed week program.
Control mode
If the Week Program Timer function is enabled during the installation (MRF), the option to activate or
deactivate the Week Program is available in the control mode only.
Sensor mode
In the Sensor mode the option is available when connected with the xComfort SHC (e.g. Room Manager),
otherwise the Week Program is not available.
Note:
If the Week Program is activated (ON), then the operation mode will switch to the correct
operation mode according to the week program for the current time.
Optional
Step 1
Step 2
Step 3
Timeout
Deactivated (OFF) Activated (ON)