4 Commissioning
4.2 Running the XC-152
42
Compact PLC XC-152
05/17 MN050001ZU EN www.eaton.com
“SetIpAddress.bat“ file with the following contents:
ipsetup.exe -a 172.16.10.20 -r
Once you insert this SD card into the XC-152 and restart it, the XC-152 will
always have IP address 172.16.10.20.
More information:
→
System Description Windows CE, MN05010007Z,
Network setting (Network) and
AutoLaunch sections.
4.2 Running the XC-152
Once the device has been initially commissioned, it will run whenever it is
connected to the supply voltage.
In other words, it does not have to be separately switched on and off.
Operating states
Operating system running:
Operating system started in detect mode:
→
If the device will not start, or if the LEDs are signaling an error
message, follow the instructions in the "Faults" section.