3 Installation
3.5 Mounting
Compact PLC XC-152
05/17 MN050001ZU EN www.eaton.com
33
3.5.1 DIN-rail mounting
Figure 8:
Example showing XC-152-D6-11 mounted on a DIN-rail
3.5.1.1 Mounting
▶
1. Hook the device onto the mounting rail from above.
▶
2. Push the bottom of the device against the DIN-rail until the device locks
into place.
▶
3. Push the two locking sliders towards the back of the device in order to
make sure that the DIN-rail is engaged properly.
The device must securely engage the DIN-rail.
3.5.1.2 Dismantling
▶
1. Use a flat screwdriver to pull the two locking sliders downwards until
they lock into place.
▶
2. Remove the device from the DIN-rail.
Figure 9:
Mounting on top-hat rail
Figure 10:
Dismantling
1
2
3
1
2
3