Eaton XC-152 Series, Manual, Page: 6 / 86

2
Compact PLC XC-152 05/17 MN050001ZU DE www.eaton.com
3 Installation.................................................................................. 25
3.1 Prerequisites for the location of use ............................................ 25
3.1.1 Installation position ...................................................................... 25
3.2 Conditions for marine approval (DNV GL) .................................... 26
3.2.1 Radio interference suppression filter for the 24 V DC supply...... 27
3.3 Communication cables................................................................. 28
3.3.1 Preparing the cables with the SUB-D plug................................... 29
3.3.2 Screening the communication cables used ................................. 30
3.4 Unpacking and checking the equipment supplied ....................... 31
3.5 Mounting ..................................................................................... 32
3.5.1 DIN-rail mounting ......................................................................... 33
3.5.2 Screw fixing ................................................................................. 34
3.6 Preparing the device for operation............................................... 35
3.6.1 Power supply 24 V DC ................................................................. 36
4 Commissioning .......................................................................... 39
4.1 Initial Commissioning................................................................... 40
4.1.1 Configuring the system settings.................................................. 40
4.1.2 Connect Computer and XC-152 in the network ........................... 41
4.1.3 Connect Computer and XC-152 connected directly with a cable. 41
4.1.4 Setting the IP address with an SD card ....................................... 41
4.2 Running the XC-152 ..................................................................... 42
4.3 External memory.......................................................................... 43
4.3.1 Inserting and removing the SD card ............................................ 43
5 External connections ................................................................. 45
5.1 Layout overview........................................................................... 46
5.2 USB interfaces ............................................................................. 47
5.2.1 USB device .................................................................................. 47
5.2.2 USB Host ..................................................................................... 47
5.3 Ethernet ....................................................................................... 48
5.4 Serial interfaces to other devices................................................. 49
5.4.1 RS232 (System Port).................................................................... 50
5.4.2 RS485 .......................................................................................... 51
5.4.3 CAN ............................................................................................. 53
5.4.4 Profibus........................................................................................ 55
6 XC-152 as a SmartWire-DT coordinator .................................. 59
6.1 SmartWire-DT operator control and display elements ................. 59
6.1.1 POW/AUX SWD power supply .................................................... 60
6.1.2 SWD master interface ................................................................. 62