5 External connections
5.3 Ethernet
48
Compact PLC XC-152
05/17 MN050001ZU EN www.eaton.com
5.3 Ethernet
The Ethernet port on the XC-152 can be used as a communication interface
or as a real-time field bus interface.
The Ethernet controllers support transfer rates of 10 Mbit/s and 100 Mbit/s.
Characteristics: RJ-45 socket, 8-pin, 2 LEDs (CAT5e/6), LAN1, 10/100 Mbps
To commission the communication between the XC-152 and the device, fol-
low the description for the connected device.
RJ45 socket
Status LEDs
signal
Meaning
ACT (yellow)
flashes
Data transfers, Ethernet is active
LINK (green)
lit
Active network, is connected and detected
￫
Max. cable length: 100 m.
CAUTION
FORCES ON THE ETHERNET INTERFACE
Communications may be affected, and the connection's
mechanical components may be damaged, if the Ethernet inter-
face is subjected to strong vibrations or the RJ45 plug-in con-
nection is subjected to pulling.
•
Protect the RJ45 plug-in connection from strong vibrations.
•
Protect the RJ45 plug-in connection from tensile forces at
the socket.
ACT
LINK