11
Component Installation
Driver Display Installation
Install the Driver Display where the driver can easily view and adjust the controls. Usually it will be on top of the dash-
board, flush with the front edge. For a more finished look, the display can be mounted in the dash, using the dash bezel.
Consider the method chosen for routing the wiring harness to the Driver Display when determining the optimal location,
but ease of operation and visibility of the driver display unit front panel are the primary considerations.
Driver Display Installation Procedure - On Dash
The following illustration shows a typical installation.
1.
Attach the Driver Display to the mounting bracket with the four supplied #6 x 5/16" self-threading screws.
2.
Use an alcohol-based cleaner on the surface where the driver display unit bracket will be installed.
3.
Attach the Driver Display mounting bracket to the desired spot on the dashboard.
4.
Secure the Driver Display bracket with screws if necessary. Four #6 x 5/16" screws are provided.
1 - Driver Display
2 - Mounting Bracket
3 - Screws (qty. = 4- #6 x 5/16")
4 - Double-sided Tape (part of mounting bracket)
5 - Dashboard
1
4
2
5
3
Summary of Contents for VORAD AlwaysAlert
Page 29: ......
