21
Diagnostics
Dynamic Antenna Alignment Procedure
a.
Use Alignment Program supplied by Eaton.
b.
Press Start and follow procedure.
4.
Activate SmartCruise and confirm operation S/C light should come on when host is within 2 seconds of
another vehicle.
5.
Confirm that the Jake brake activates to maintain the appropriate following distance.
6.
Confirm audible alerts and that the audible alerts.
An operator must be driving the vehicle while an assistant performs the tests.
This tool checks the alignment of the VORAD antenna.
Alignment should be made to within 0.5 degrees.
A straight road is required.
1. Speed - recommend highway speed 50-65 MPH
2. Distance - follow at 200-300 feet
3. Data amount - recommend 2-5 miles or until the angle calcuation is stable
4. Pause in curves or traffic cut in/out
5. Try to match the lane position of target vehicle
Best vehicle to follow is a semi van trailer because of radar reflective
properties of the flat rear square surface.
OK
Realtime Angle (degrees)
0.12
Following distance (200-300 feet)
245
Turn rate (-0.3 left to 0.3 right)
0.0
Vehicle speed (50-65 MPH)
61
Calculated Average Angle
0.15
Adjust Alignment Screw
3/4 turn clockwise
CPU Serial Number
Start/Stop
Clear
Speedcal
CAUTION
Summary of Contents for VORAD AlwaysAlert
Page 29: ......
