51
© 2017 Eaton. All rights reserved
2018.12.12
VCS/VMS Auxiliary Section Removal and Disassembly
|
Service Procedures
TRSM0940
14.
Remove the Range Synchronizer Assembly with the
Range Yoke from the Output Shaft.
Note:
For disassembly and assembly of the Synchro-
nizer, please refer to the “How to disassemble the
Synchronizer Assembly” section.
15.
Remove the Low Range Gear and Coupler Assembly.
16.
Using a punch and hammer, drive the two coupler pins
from the front of the coupler. Align the coupler splines
with the washer splines and remove the range coupler
from the Low Ranger Gear (Reduction Gear).
17.
Remove the bushings from inside the coupler if neces-
sary.
Summary of Contents for UltraShift PLUS FM-14E310B-LAS
