5 Take XSoft-CoDeSys-2 into operation
5.7 Cyclic data communication via input/output addresses
SmartWire-DT Gateway EU5C-SWD-DP
01/13 MN120001Z-EN
www.eaton.eu
37
5.7 Cyclic data communication via input/output addresses
When the SWD modules are configured in the XSoft-CoDeSys-2 PLC pro-
gramming environment, the modules' input/output addresses are assigned
automatically. The addresses assigned to the individual SmartWire-DT mod-
ules can be seen in the PLC programming environment.
Figure 21:
SWD module addresses is XSoft-CoDeSys-2
These inputs and outputs can be addressed using the PLC's I/O image table.
→
Please refer to the manual "SmartWire-DT Modules",
MN05006001Z-EN, "Module properties" for the exact configura-
tion and meaning of the input and output data.