5 Take XSoft-CoDeSys-2 into operation
5.2 Select field bus master
32
SmartWire-DT Gateway EU5C-SWD-DP
01/13 MN120001Z-EN
www.eaton.eu
5.2 Select field bus master
Then please proceed as follows:
▶
Start XSoft-CoDeSys-2 and open a project.
▶
Open the "Controller configuration" in the "Resources" tab and select the
Profibus bus master module XIOC-NET-DP-M. This must be positioned
on the first three slots.
Figure 15:
Selection of the DP master in XSoft-CoDeSys-2
5.3 Select gateway as field bus module
▶
Select the field bus master and use the "Insert" -> "Attach subelement"
menu option to open the selection list of field bus modules.
▶
Select the GSD file „EU5C-SWD-DP V1 (Int) (Moe4d14.gsd“.
