Eaton PDI WaveStar, Setup And Operation Manual

Page: 29 / 68

Eaton PDI WaveStar Color Monitor Setup and Operation Manual P-164001109—Rev 01 19
44..22..55 LLooaaddiinngg IIN NII P Paarraam meetteerrss ffrroom m aann S SD D C Caarrdd
Touching Load INI loads configuration parameters from an SD card inserted into the Monitor. This function
makes it easy to initialize a set of Monitors using common parameters. It is intended for manufacturing and
service use.
44..33 S Sooffttw waarree V Veerrssiioonnss
Figure 15. Model Information
On
HOME
screen, touch the
SOFTWARE VERSIONS
button to display a scrollable list of version levels
for the Monitor and devices in its device chain.
Color Monitor (Display) software
VERSION
number, from onboard software.
MODEL
is intended as a customer-specifiable ID
identifying the unit in which the Monitor is installed,
such as “PDU 182.”
Touch MODEL to enter the model number.
A keyboard appears requesting the
password (Enter “VNUP”).
If password is accepted, a second keyboard appears
asking you to enter the model number.
Device version numbers are customer-specifiable IDs,
intended as device software version numbers.
Specify these in the VERSION field of
DEVICES DEVICE SETTINGS
screen.
The SOFTWARE VERSIONS list (see Figure 15 ) lists information about software levels for the Monitor and its
device chain and a customer-specified model number for the unit in which the Monitor is installed, such as a
PDU or RPP. The list has no configuration use: it does not have parameters that determine Monitor operation.
• MODEL number : Touch MODEL and enter model number with the pop-up keyboard.
• Display Version Number is given by the Monitor’s onboard software.
• Device Version Numbers are entered in device setup: Go to DEVICES screen, select device, select
VERSION field, and enter data.
Setup: Monitor and Network