Eaton PDI WaveStar, Setup And Operation Manual

Page: 17 / 68

Eaton PDI WaveStar Color Monitor Setup and Operation Manual P-164001109—Rev 01 7
C Chhaapptteerr 33 C Coolloorr M Moonniittoorr N Neettw woorrkkiinngg
33..11 S Suuppppoorrtteedd P Prroottooccoollss
All protocols supported by the Color Monitor can be used simultaneously.
Downstream Protocol The downstream device network has fixed parameters of Modbus RTU, 9600 baud,
EVEN parity.
Upstream Protocols There are separate upstream ports for Modbus RTU and Ethernet, supporting these
protocols:
• Modbus RTU
• Ethernet port
– TCP/IP, used by the web page server (see Chapter 8 Web Pages )
– Modbus TCP/IP
– SNMP Version 1
33..22 M Moonniittoorr N Neettw woorrkk C Coonnnneeccttiioonnss
The Color Monitor’s backpanel has Modbus RTU and Ethernet ports (see Figure 4 ).
For Color Monitors embedded in Eaton products (PDUs, RPPs, or JCOMMs), Modbus RTU backpanel
connections are typically made in manufacturing and extended to a terminal block or external panel for
convenient customer access. See paragraph
3.5 Customer Modbus RTU Connections .
The customer’s Ethernet cable is connected directly to the Monitor’s Ethernet port.
Figure 4. Color Monitor Network Connections