Eaton PDI WaveStar, Setup And Operation Manual

Page: 11 / 68

Eaton PDI WaveStar Color Monitor Setup and Operation Manual P-164001109—Rev 01 1
C Chhaapptteerr 11 S Saaffeettyy
Please pay special attention to the use of “Danger” symbols throughout this manual indicating electrical or
other safety hazards. Following these safety instructions is extremely important to avoid possible injury or
death.
The WaveStar ® Color Monitor must be installed by licensed electricians or by Eaton-authorized technicians.
Follow safe electrical work practices:
• Read, understand, and follow the instructions before installing this product.
• Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel
and in accordance with all local safety codes. This document should not be viewed as sufficient by
otherwise non-qualified personnel to operate, service, or maintain the equipment discussed.
• Disconnect and lock-out all power supplying equipment before working on or installing WaveStar ® Color
Monitor components. Use a properly rated voltage sensing device to confirm power is OFF.
• Install device in an appropriate electrical enclosure per local regulations.
• ESD sensitive equipment. Ground yourself, discharge any static charge and ensure that the device is
effectively grounded before handling the unit.
• Severe or fatal injury can result from electrical shock during contact with high voltage conductors,
monitoring PCBs, or similar equipment.
• Disconnect power before drilling holes, attaching conduit, and attaching WaveStar Color Monitors to
PDUs, RPPs, or other power distribution equipment.
• Use Lock Out/Tag Out procedures.
• Wear suitable personal protective clothing and use protective equipment for performing mechanical and
electrical installations.
• Leave ample space for attaching and routing wires.