14
EATON
LifeSense Wireless System Quick Setup Guide E-HOOV-II002-E July 2014
USB thumb drive or memory stick), for upload. When the
sensor data is successfully loaded click Next.
Configuring with No Sensors
You may also elect to skip configuring the sensors to the
wireless gateway (HDU) if you would prefer to add them at a
later time; to do so, check the box next to Configure with no
sensors. Click Next.
The wizard is now able to configure the wireless gateway
(HDU) and customer account. If you would like to review
the information you’ve input before configuring the wireless
gateway (HDU) click on the Review Selections button.
A popup screen will appear listing the setting selections
you’ve made for the gateway. If you are satisfied with the
selections you’ve made click the Configure button.
If you need to make changes, click the Cancel button, then
use the back button to navigate to the applicable screen(s)
where you need to make your modifications.
Wireless Gateway (HDU)
Configuration
(LifeSense Installation Wizard)
