3
Instructional Leaflet
IL0131187EN
Effective June 2022
Installation and removal instructions
for IZM series fixed breaker
three-way Type 32 cable interlock kit
EATON
www.eaton.com
Table 2. Interlock assembly kits for interconnected breakers
Interconnected
breaker
Interlock assembly kit
for fixed breaker
Interlock assembly kit
for drawout breaker
IZMX16
IZMX-MIL32C-F16-1
IZMX-MIL32C-W16-1
IZMX40
IZMX-MIL32C-F40-1
IZMX-MIL32C-W40-1
IZM63/IZM32
IZMX-MIL32C-F63-1
IZMX-MIL32C-W63-1
Table 3. Interconnecting cable kits (two cables per kit)
Cable kit length
Catalogue number
1,5 m (5 ft)
IZMX-MIL-CAB1520-1
1,8 m (6 ft)
IZMX-MIL-CAB1830-1
2,4 m (8 ft)
IZMX-MIL-CAB2440-1
3,0 m (10 ft)
IZMX-MIL-CAB3050-1
a
Cable kits are purchased separately as needed.
Figure 2. Interlock kit part identification, includes parts to install on a single fixed IZM frame breaker and cassette
(does not include cables)
Figure 3. Interconnecting cable kit part identification (includes cables)
(E)
Interlock
assembly
1x
(F)
Grease tube
1x
(A)
M6 x 12 mm
hex bolt
4x
(B)
M6 x 25 mm
flathead screw
1x
(C)
Lock
washer
6x
(D)
Drive arm
1x
(H)
M6 x 10 mm
thread-forming
screws
2x
(G)
Cable bracket
1x
41,3 mm (1,625 inch)
cable tube spacer
1x
(M)
(L)
M6 x 20 mm
thread hex bolt
2x
(K)
M6 fender
washer
2x
M6 square nut
3x
(J)
Fixed mounting plate
1x
(I)
(P)
(O)
(N)
(P)
Pre-installed on
long rod end
(O)
Pre-installed on
short rod end
Cable assembly (see
Table 3
)
2x
38,1 mm (1,5 in)
cable tube spacer,
one pre-installed on each
cable assembly and
two shipped loose
4x
22,2 mm (0,875 in)
cable tube spacer, one
pre-installed on each
cable assembly
2x
