![background image](http://html1.mh-extra.com/html/rs/v9727/v9727_instruction-leaflet_1495701001.webp)
Issued / Herausgegeben / Publicado / Publication / Pubblicato
10/99
V9727
Installation
This breaker operates when installed in any position. It is immaterial
whether the incoming mains supply is connected to the top terminals
and the load to the bottom terminals or vice versa. To ensure the
protection of this breaker from excessive short circuits, the maximum
accompanying fuse, to be wired upstream, is a 63A gl type. It is also
important that any load current likely to pass through the breaker does
not exceed its IN rating, by correct selection of the fuse protecting the
load, which should be lower than (or equal to) the IN rating of the
breaker.
Operation
Press the test button to check if the breaker is functioning correctly. This
should be done every time the breader is used and at least every month.
For correct operation, the voltage between phase and neutral must be
in the range 200 to 250V.
The test button circuit operates independently of the earth, so it is
necessary to check the maximum earth resistance rating (Rm) is in
accordance with any local standard or regulation; guidance figures are
given below:
Technical specification
Rated Voltage
2 pole
240V
max
50/60Hz
4 pole
415V
max
50/60Hz
Breaking capacity
6000A
Operating temperature
-25 to + 40°C
Wire capacity
2 pole
16/25/40A
0.75 - 16mm2
63/80A
1.5 - 25mm2
4 pole
1.5 - 25mm2
RS Components shall not be liable for any liability or loss of any nature (howsoever
caused and whether or not due to RS Components’ negligence) which may result
from the use of any information provided in RS technical literature.
Contact Voltage
Tripping Current
10mA
30mA
100mA
300mA
500mA
25V
2500
Ω
835
Ω
250
Ω
83
Ω
50
Ω
50V
5000
Ω
1670
Ω
500
Ω
167
Ω
100
Ω
N
T
4
6
N
1
3
5
2
T
2
4
1
3
Figures / Abbildung / Figura
Residual current circuit breakers: din rail mount
economy range
Instruction Leaflet
Bedienungsanleitung
Hojas de instrucciones
Feuille d’instructions
Foglio d’instruzioni
Reststrom-Schutzschalter-
DIN-Schienen-Montage, Sparversion
Disyuntores de la corriente residual Montaje en
carriles DIN, línea económica
D
isjoncteurs de protection contre les courants résiduels:
montage sur alimentation DIN, gamme “Economie”
Interruttori automatici di corrente residua:
Attacco a barra DIN, gamma Economy
1
2