System Options Menu
Page 101
Level 4 Updates
Setting this option to Enabled allows the level-4 user to update the firmware and language
files at the control unit using the Web interface.
The first time you select Enabled, you are prompted to create the level-4 user by entering
a user code. There can be only one level-4 user.
Once created, the level-4 user can log into the web interface and update the firmware and
language files at the control unit, providing
Level 4 Updates
is enabled in the Installer
menu and
System Config
– Facilities On/Off – Level 4 Update
is enabled in the User
menu.
The level-4 user is also able to log into the User menu or web interface and change the
level-4 user name and code. The default user name is "Level4".
A level-4 user cannot perform other tasks, such as to set or unset the system, omit zones,
etc.
Panel Upgrade
Selecting this option displays a list of .bin firmware files located in the INSTALL folder on
the SD card (if fitted). You can use the option to upgrade the control unit's firmware. The
current firmware is indicated by a *.
Note:
The upgrade may default the control unit's configuration settings. Before using
Panel Upgrade
, it is recommended that you back up the system configuration using the
Downloader software or the web interface.
Selecting a file begins the upgrade process. During the upgrade, the control unit will restart
and the keypad's navigation LEDs may flash red. After the upgrade, the keypad returns to
normal standby mode.
