System Options Menu
Page 93
Note:
You will see PSTN Line Fault if the control unit uses PSTN communications. You
will need to re-enter the appropriate telephone numbers (or disable communications
using
Communications
– ARC Reporting – Call Mode
).
If you are using the web interface, re-enable the web browser interface and re-enter
the control unit’s own IP address (page 116). Note that you will also have to use
User Menu
– System Config – Facilities On/Off – Remote Access
to enable remote
access.
Installer Name
When logging in to the web interface, you must enter the username specified by this
option. The username is case sensitive.
Installer Code
This code allows you to enter the Installer menu (which also carried out an Installer reset).
When logging into the web interface, you must key into the password field the same code
as you have programmed into the
Installer Code
field.
The Installer code does not allow you to set or unset the system.
Keypad Text
This allows you to specify the text that appears on the first line of the display in the
standby screen (such as your company name). See page 19 for editing text.
Remote Needs Entry
This option relates to the use of remote controls when unsetting a full-set system or full-set
partition.
Enabled
The user must first trigger a Final Exit zone and start the entry timer before unsetting
a full-set system or partition with a remote control. The system unsets those partitions
the user is assigned to that have an active entry timer. If a partition that the user is
assigned to does not have an active entry timer, the partition remains set.
Disabled
The user can unset the system or partition using a remote control without first starting
the entry timer. The system unsets all partitions that the user is assigned to.
Remote Entry Part Set
This option relates to the use of remote controls when unsetting a part-set system or part-
set partition.
Enabled
The user must first trigger a Final Exit zone and start the entry timer before unsetting
a part-set system or partition with a remote control. The system unsets those
partitions the user is assigned to that have an active entry timer. If a partition that the
user is assigned to does not have an active entry timer, the partition remains part set.
