Front Section
Front Section
69
2. Align the shift block with the shift bar matching
the roll-pin holes and install the retaining roll pin.
Using tool E001044, push the roll pin until it is
flush with shift block hub.
Note:
Replace the roll pin by a new one.
624
Some through holes in housings are drilled for
machining purpose only and must be blocked later by
using cup-type metal expansion plugs.
During the transmission life, it is possible to happen
that some of those plugs should be removed and
reinstalled when servicing the unit.
Removal
1. In the housing, locate the expansion plug that
should be removed. Use the special device
E005005 and make a thread in the plug.
Expansion Plugs
639b
2. Use one retaining capscrew removed from the
housing and insert it into the plug, threading it
until it stays firmly in place.
EA046
3. Use the impact puller E003001 and adapter
E004002 to remove the capscrew and the plug
comes along.
EA169