Front Section
82
2. Slide the keys and springs out from the
synchronizer hub slots and remove them.
EA074
Assembly
1. Place the spring inside the key hole, depress the
spring and slide spring and key together into the
synchronizer hub. Repeat this procedure for the
three keys.
EA074
2. The center of the key must coincide with
the center of the recess in the synchronizer
sleeve teeth, at the three positions. With that
in mind, align the synchronizer sleeve with the
synchronizer hub.
EA076
3. To help when assembling, position a synchronizer
ring at the sleeve opposite side and insert the
ring lugs into the synchronizer hub key slots.
EA077
4. Place the assembly on the bench with the
synchronizer ring facing down.
5. With the hands, install the synchronizer sleeve
on the synchronizer hub by forcing the sleeve
downwards.
EA075
Installation
1. Install the synchronizer hub with its most
protruding side facing to the 3rd speed gear.
2. Install the synchronizer sleeve with its chamfered
side facing to the same side of the most
protruding side of the synchronizer hub.
382