MadBoy C-TUBE 10, Manual

Page: 1 / 8

Installing the Battery
1. Remote the grill by turning it counterclockwise.
2. Remove the cartridge by turning it counterclockwise.
3. Install battery to the battery compartment. Pay attention to the correct polarity.
CONDENSER MICROPHONE
C-TUBE 10
WWW.MADBOY-AUDIO.COM
Operating Instruction
1. Insert the microphone cable into the microphone terminal.
2. Turn the switch to ”ON” position and adjust the volume on the mixer or mixing amplifier.
3. Turn off the microphone by turning the switch to ”OFF” position.
4. Remove the battery if microphone is not used for long time to prevent battery leakage.
Handling precautions
Ÿ
To minimize feedback, place the microphone so that unwanted sound sources, such as monitors and
loudspeakers, are directly behind it. Feedback is produced when the signal from the microphone is
amplified and picked up again from the speaker. The signal continues to amplify and produces unpleasant
noise, which can damage your speakers.
Ÿ
Do not drop, hit or apply strong pressure to the microphone. Warranty won’t cover damages due to
improper handling of the microphone.
1
2
3
P R E M I U M K A R AO K E S YS T E M S