background image

 

1

 

FISCHER AMPS 

 
 

MANUAL 

 

In Ear Amp 

 
 

 

Dear customer: 

You have decided to buy a 

Fischer Amps

  product. Thank you.  

 

Please read this manual carefully prior to the first use, you will get important information for 
use and safety of the unit. These safety and operating instructions should be retained for 
future reference.  
 
Should you have further questions, please do not hesitate to contact FISCHER AMPS
.  

 
 

Product Description: 

Fischer Amps In Ear Amp: A high-quality headphone amp in 9.5-inch metal housing. This Amp completes our 
product line of wired in ear headphone amps. Many in ear monitoring applications do not require the use of 
wireless technology. Hard-wired in ear systems provide many advantages: They provide more dynamics and 
higher sound quality, and you save wireless frequency channels which can be used for other systems. 
Combined with the new Guitar In Ear Cable, the Fischer Amps In Ear Amp is the ideal solution not only for 
guitar and bass guitar players who prefer to perform with wired equipment on stage. It is also perfect for 
keyboard players, drummers, orchestra musicians ... 

 
 

 
Basic information on the use of in-ear monitor systems: 

 

CAUTION:  
Using this system at too high sound levels may cause permanent hearing defects. Adjust the 
volume so that you can hear sufficiently. Ringing in the ears can indicate that the adjusted 
hearing level is too high. Use headphone systems with good fitting which suppress the 
ambient noise well. This allows that the required listening volume can be low which is kind to 
your ears. 

 

Summary of Contents for In Ear Amp









Reviews: