![background image](http://html1.mh-extra.com/html/eaton/durant-eclipse-series/durant-eclipse-series_assembly-installation-and-operation_3818899014.webp)
13
PROGRAMMING cont.
2. Press
to select which digit to change (flash), then use
or
to
change the value of the flashing digit.
Durant
®
3. After all digits have been edited, press
PGM
to go back to the parameter
name.
Durant
®
The Parameter List
The following list shows all programming parameter names, the default value for
each, and the selection range for each. A programmed unit may be restored to de-
fault settings by pressing both the program (
PGM
) and right arrow (
) keys for
one second. The display will show dFL while the keys are pressed and blink off
momentarily when the default is done.
Parameter
Default
Description/
Name
Value
Range
Display rate or display process time.
Rate
Process time